New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors West Palm Beach pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Why West Palm Beach Homeowners Choose Therma-Tru Windows & Doors
We’re Meridian Windows and Doors West Palm Beach, and we provide Therma Tru service in West Palm Beach, including independent repair, replacement, and installation across the area. Our crew works on Classic-Craft, Smooth-Star, Pulse, and Fiber-Classic systems every week, which means we diagnose salt-air corrosion and heat-warp failures on the first visit instead of the third. We are not affiliated with or authorized by Therma-Tru. What we are is a local crew that knows exactly how these doors behave after five or ten years in Florida’s heat and humidity. Call (728) 728-9381 to schedule service.
Why Trust Meridian Windows and Doors West Palm Beach for Your Therma-Tru Windows & Doors?
Elliot Vance, our owner, learned the windows and doors trade at Los Angeles Trade-Technical College before moving his operation east. He and our crew have been serving West Palm Beach for over a decade, from mid-century homes in Northwood Hills to newer construction near CityPlace, and we also offer Therma Tru in Palm Beach Gardens. What that means for your Therma-Tru door is simple: we’ve already seen the failure mode yours is showing. A Classic-Craft door that sticks at the top corner in August. A Pulse multi-point lock that binds after two hurricane seasons. A Fiber-Classic frame joint pulling apart under wind load. We know what caused each one and what actually fixes it, not just what the parts catalog suggests. Every repair gets a written price before work starts and a written 365-Day Done Right Promise after it’s done. The phones are answered by a live person around the clock. You’ll know who’s coming to your door before we ring the bell. Measure it right the first time and the install explains itself.
Common Therma-Tru Windows & Doors Problems We Fix in West Palm Beach
- Classic-Craft door skins delaminating around the lock bore and handle set. Direct sun beats on south-facing entry doors in West Palm Beach for hours a day. Over five to eight years, the fiberglass skin on Classic-Craft Mahogany Collection doors can separate from the core around drilled hardware openings. We re-bond the skin and reinforce the bore, then replace the handle set with stainless hardware.
- Bottom sweep and Q-Lon compression weatherstrip flattening in humid air. The Q-Lon weatherstrip on Classic-Craft doors is a quality material, but constant moisture compresses it over time. We stock replacement Q-Lon and door bottom sweeps locally, so this is usually a same-visit fix.
- Multi-point locking system on Pulse doors binding after salt-air corrosion. The Pulse entry system uses a multi-point lock with steel components. Near the Intracoastal or the ocean, salt air gets into the gearbox and the lock rods start binding. We replace the factory hardware with premium stainless steel multi-point locks that stand up to West Palm Beach’s coastal air.
- Fiber-Classic frame joints expanding and letting wind-driven rain enter behind the sill. The Fiber-Classic Oak frame is solid material, but the corner joinery can open up under repeated pressure from hurricane-force gusts and thermal expansion. We rebuild the sill pan and reseal the frame corners rather than telling you to buy a new door.
- Heat-warped Smooth-Star slabs that no longer close flush against the weatherstrip. Smooth-Star fiberglass doors hold up well, but sustained morning sun on an east-facing entry can cause slight warpage. The door still works but leaks air at the latch side. We adjust the hinge alignment and replace the compression weatherstrip to restore the seal.
Therma-Tru Parts & Our Repair-vs-Replace Approach
We use OEM Therma-Tru parts for hinges, sweeps, and sill adapters when the door’s warranty is still active. That keeps the warranty intact and is the right call for most newer doors. But when a factory part is the problem, we don’t put the same part back in. Pulse multi-point locks near the coast are a perfect example. The OEM gearbox is fine for inland houses, but West Palm Beach’s salt air eats it. We switch to premium aftermarket stainless steel locks and Q-Lon weatherstrip that outlast the factory spec in this climate. And we will not push a new door when the frame is solid. If your slab is sound and the threshold can be rebuilt, we repair. Last month our tech pulled a Classic-Craft Mahogany entry door in West Palm Beach that had swollen shut after storm water got behind the brick mold. We re-hung the same slab on a rebuilt sill pan, swapped the corroded factory hinges for stainless steel, and replaced the flattened Q-Lon compression weatherstrip. The customer kept their original six-panel door instead of buying a new one. Call (728) 728-9381 for an honest repair-or-replace recommendation.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We inspect the slab alignment, weatherstrip condition, hinge wear, threshold integrity, and lock function. For Pulse doors, we also check the multi-point lock rods and gearbox for corrosion. You get a written diagnosis with a line-item price.
- 2
Repair or replacement. We use OEM Therma-Tru parts where warranty dictates and aftermarket stainless or Q-Lon upgrades where they’ll last longer. Every part and labor cost is already on paper before we turn a screw.
- 3
Testing. We open and close the door at least ten times, spray the threshold with water to confirm no leaks, and lock and unlock every point on the multi-point system. On windy days we check for air infiltration along the jambs.
- 4
Warranty. Every repair and installation is covered in writing by our 365-Day Done Right Promise. If the work fails within that year, we return at no charge. That’s written on every job, no exceptions.
Therma-Tru Products We Service & Install in West Palm Beach
Our crew is trained on the specific frame and sill designs of these Therma-Tru lines: Classic-Craft Mahogany Collection, Classic-Craft Rustic Collection, Smooth-Star Fiberglass, Pulse entry doors, and Fiber-Classic Oak. We also handle Therma-Tru hinged patio doors and their impact-rated entry systems. We stock Q-Lon weatherstrip, door bottoms, stainless hinges, sill caps, and multi-point lock upgrades locally in West Palm Beach, which means most weatherproofing repairs don’t wait on a parts shipment. If you’re replacing rather than repairing, we’ll spec the Therma-Tru door that matches your home’s existing style and then install it to hold up against Atlantic hurricanes and salt air, or explore our Window Replacement services if that’s the better solution.
We Also Service These Brands
Meridian Windows and Doors West Palm Beach carries eight manufacturer lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, ViewLux, and Therma-Tru. That matters because we’re not tied to selling you one brand. If a PGT impact window or a CGI door is the better fit for your opening, that’s what we’ll recommend. Our loyalty is to the install holding up for years in West Palm Beach, not to moving a particular product line.
FAQs – Therma-Tru Windows & Doors Service in West Palm Beach
No. We are an independent Therma-Tru service provider in West Palm Beach. We’re not authorized by or affiliated with Therma-Tru as a corporation. What we are is experienced with their product lines, trained on the frame and sill designs of Classic-Craft, Smooth-Star, Pulse, and Fiber-Classic doors, and fully licensed and insured for the work we do. Independence means we can recommend the repair that serves you best without being tied to manufacturer protocols.
Yes, when the door’s warranty is still active or the OEM part is the best option, we use genuine Therma-Tru parts for hinges, sweeps, and sill adapters. When a factory part is the known weak point in West Palm Beach’s coastal environment, we use premium aftermarket replacements: stainless steel multi-point locks and Q-Lon compression weatherstrip that outlast OEM specifications in salt air. We’ll tell you which we’re using and why before any work begins. Call (728) 728-9381 if you want to talk through your specific door.
Most weatherstrip replacements, hinge adjustments, and sweep replacements are done in a single visit of one to two hours. A multi-point lock replacement on a Pulse door runs two to three hours. Full frame replacement or a new door installation typically takes one day for the installation itself, with the opening prepped and sealed correctly before the door goes in. We’ll give you a time window in writing with your estimate.
We service and install Classic-Craft Mahogany Collection, Classic-Craft Rustic Collection, Smooth-Star fiberglass, Pulse entry doors, Fiber-Classic Oak, and Therma-Tru hinged patio doors. If your Therma-Tru product isn’t listed here, call us anyway. We’ll tell you honestly whether we can service it or whether you need a specialist we can refer.
If your Therma-Tru door is under warranty, we use OEM parts for warranty-covered components to keep that coverage intact. We’ll review the warranty terms with you before any work starts so there are no surprises. If the warranty has lapsed, we’ll recommend parts based on longevity in West Palm Beach’s salt air and sun, not on what the manufacturer’s catalog defaults to.
Most Therma-Tru repairs in West Palm Beach run $180 to $340 for weatherstrip replacement, hinge alignment, or sweep replacement. A multi-point lock replacement on a Pulse door typically runs $380 to $620 depending on hardware grade. Full door replacement with a new Therma-Tru Classic-Craft or Smooth-Star slab starts around $1,800 to $3,200 installed, and impact-rated Therma-Tru entry systems run higher. These are real line-item ranges, not teaser prices. Call (728) 728-9381 for an exact quote. Estimates are free.
Book Your Therma-Tru Service in West Palm Beach, FL
If your Therma-Tru door is sticking, leaking, or the lock is fighting you, call us at (728) 728-9381. We’ll give you a written price before any work starts and a 365-Day Done Right Promise when it’s finished. Serving West Palm Beach from Northwood Hills to El Cid to the neighborhoods near CityPlace, plus Therma Tru in Wellington.
Written by Elliot Vance, Owner at Meridian Windows and Doors West Palm Beach, serving West Palm Beach since 2009.
Six Reasons Homeowners Choose Meridian Windows and Doors West Palm Beach
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.