New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors West Palm Beach pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Windows & Doors in Wellington, FL | Meridian Windows and Doors West Palm Beach
We provide independent Mr-Glass Window Replacement in Wellington and door service across the area, and the one thing that sets our work apart here is the dust. Fine sand from the bridle paths and equestrian rings works its way into roller tracks and weatherstripping in ways you simply don’t see in coastal communities ten miles east. Our crew has been pulling apart Mr-Glass units in Wellington long enough to know exactly what that grit does to a 5500 Series slider or a 4500 Series single hung. We’re Meridian Windows and Doors West Palm Beach, and we service the full Mr-Glass residential range without any manufacturer affiliation. Call (728) 728-9381 for a straight answer and a written estimate.
Why Wellington Residents Choose Us for Mr-Glass Service
Most window companies in Wellington will tell you they can “take a look” at your Mr-Glass unit and then recommend a full replacement before they’ve even removed the sash. We take a different approach. Elliot Vance, our owner, learned the trade at Los Angeles Trade-Technical College and has been running crews in South Florida for over a decade. He’s the first to say that a sagging balance or a worn roller doesn’t always mean a new window. We replace what’s failed, keep what’s sound, and give you the option written down with dollar figures attached before any work starts. Our techs know the Mr-Glass product line well enough to identify a 4500 Series balance issue by the way the sash tilts, not by reading a manual on the tailgate. For Wellington homeowners in gated communities with strict HOA rules on materials and styles, that kind of familiarity means fewer return visits and fewer board complaints.
We carry OEM Mr-Glass parts for critical components and keep a stock of aftermarket rollers, weatherseals, and interlock parts that we’ve found outperform the originals under Wellington’s specific conditions. Every job goes on paper before we start, and every job is covered by our 365-Day Done Right Promise. If the repair fails within that year, we come back at no charge. That’s the Garrison Standard, and it applies to every Mr-Glass call we run in Wellington.
Common Mr-Glass Windows & Doors Problems We Solve in Wellington
- Sash balance failure on Mr-Glass 4500 Series single hungs. Wellington’s summer humidity works into the balance channels and accelerates corrosion of the springs. The sash starts closing crooked or slamming shut. We replace the balances with OEM-spec parts and reset the tilt latches so the window locks square. This is the single most common Mr-Glass repair we handle in Wellington, especially on west-facing walls that cycle between hot sun and air-conditioned interiors.
- Roller assembly wear on Mr-Glass 5500 Series horizontal sliders. Equestrian dust is the silent killer of these units. Fine sand from the bridle paths off South Shore Boulevard and Aero Club Drive packs into the lower roller housings and grinds the bearings down over two or three seasons. The door starts dragging, then jams. We pull the sash, clean the track, and install sealed aftermarket rollers that shed grit better than the factory originals.
- Weatherstripping compression set on Mr-Glass 8500 Series impact casements. Wellington homes built since the 1990s saw a lot of these impact-rated casements installed on rear elevations facing the lake or the ring. Through repeated seasonal expansion and contraction, the corner seals compress permanently. Air starts moving through, and energy bills tick up. We strip the old gasket and install a high-recovery weatherseal that maintains contact pressure through the full cycle.
- Seal failure and fogging on older Mr-Glass dual-pane units. Large western-facing glass walls on Wellington’s ranch-style homes absorb intense afternoon sun for years. The butyl seal around the glass edge eventually fails, letting moisture in between the panes. You get fogging you can’t wipe away. We give you the straight answer: if the frame is sound, replacing the insulated glass unit is the fix. If the frame has started to distort, you’re looking at a full panel replacement to maintain impact compliance.
- Interlock and alignment issues after hurricane impact testing. Some Wellington homes have had windows and doors tested or impacted during past storms. The frames hold, but the interlocks can shift slightly, and the panels no longer meet clean. We re-set the interlock alignment and replace any component that’s been knocked out of tolerance so the unit seals and locks like it should.
Mr-Glass Service in Wellington: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic Mr-Glass page: Wellington’s equestrian estates include converted barns and guest houses with non-standard door heights and arched windows that off-the-shelf Mr-Glass replacements simply won’t accept. Off Aero Club Drive and throughout the gated villages, we see openings that were framed for custom architectural glass back when the property was a working barn. A stock Mr-Glass unit won’t fit those rough openings without field modification, which means cutting and re-welding the vinyl frame on-site to match the arch radius and the non-standard height. That’s not work you want a crew learning on your guest house. We’ve done it enough times to know where the corners will bind before we even set the frame. The same applies to Mediterranean Revival homes where transoms and decorative glass sit above the main window line. The standard unit drops in fine, but the transom above it needs custom glazing that matches the original profile. Measure it right the first time and the install explains itself.
Our crew was called to a gated community off Aero Club Drive where a Mr-Glass 5500 Series horizontal roller had been jamming mid-track. Fine sand from the nearby bridle paths had packed the lower roller assemblies and the track was mildly bowed from impact testing years earlier. We pulled the sash, replaced the rollers with a sealed aftermarket set, straightened the track, and re-set the interlock so the panel sealed again without binding. The homeowner had been told by another company they needed a whole new door. They didn’t. They needed a crew that knew what Wellington dust does to a track.
Mr-Glass Models & Products We Service in Wellington
We work on the full Mr-Glass residential lineup here in Wellington, including the 4500 Series Single Hung, the 5500 Series Horizontal Roller, the 8500 Series Impact Casement, and the 3000 Series Fixed/Picture. For balances, interlocks, and impact glazing, we use Mr-Glass OEM parts to maintain the original fit and the Miami-Dade compliance rating. For rollers and weatherseals, we’ll recommend a quality aftermarket part when it outlasts the original under Wellington conditions. Our van carries the common sizes for 4500 and 5500 Series units, so a straightforward repair often happens in one visit without waiting on a parts order. When we do need to order, Mr-Glass sales & service is what we do, and we’ll give you a realistic lead time in writing, not a guess.
Mr-Glass Service Pricing in Wellington
Most Mr-Glass repair work in Wellington falls into a predictable range. A sash balance replacement on a 4500 Series typically runs $140 to $220 per sash. Roller replacements on a 5500 Series slider usually land between $180 and $320 per panel, depending on whether the track needs straightening. Weatherseal replacement on an 8500 casement runs $120 to $240 per unit. Glass seal repair with a replacement insulated glass unit is more variable, usually $350 to $700 per panel depending on size and glass package. Full frame replacement or Window Installation - Wellington for a Mr-Glass unit starts around $900 and goes up with size, impact rating, and whether field modification is required for arched or non-standard openings. Every estimate we write includes the parts, the labor, and the warranty terms on one page. Call (728) 728-9381 to get a written line-item quote before you decide anything. Estimates are free, and the number doesn’t move once we hand it to you.
Serving Wellington, FL - Our Local Coverage Area
We’re based in the Wellington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Windows & Doors in Wellington
Yes, in most cases. Impact windows installed under an earlier code edition can typically be repaired with OEM or compatible parts as long as the frame and glazing maintain their original impact rating. Where the repair would compromise that rating, we’ll tell you plainly and give you the replacement numbers instead. Call (728) 728-9381 and we’ll walk you through what applies to your specific unit.
We swap the factory rollers for a sealed aftermarket set and deep-clean the track before re-setting the panel. For homes near bridle paths or arenas, we’ll also check the weatherseal at the base of the panel, because dust gets pulled up through the drain holes and a worn seal lets it settle directly into the track. A seasonal cleaning beats a full roller replacement, and we’ll show you what to watch for. Call (728) 728-9381 to schedule service.
If the frame is sound, yes. We can field-modify a replacement sash or re-glaze the existing frame to match the arch radius. The work involves cutting and re-welding the vinyl to the original curve, done on-site. Where the frame itself has started to distort, a full replacement with custom glass is the honest answer. Call (728) 728-9381 for an exact quote on your opening.
Lead times stretch in April, May, and June. OEM impact glazing orders can take three to six weeks when the distributors are backed up. We keep common hardware in stock and start quoting longer lead times as soon as storm season approaches so you’re not caught without an unsealed opening. If you’re planning work, call (728) 728-9381 now and get on the schedule before the rush.
They do, and it’s not unique to Mr-Glass. Large west-facing walls on Wellington’s wider ranch-style homes take hours of direct afternoon sun, which cycles the seal material through thermal expansion every day for years. Eventually the butyl edge seal breaks down and the unit fogs. We see it most on homes built in the late 1990s and early 2000s. Call (728) 728-9381 and we’ll give you a repair-versus-replace answer based on the frame condition.
Service Areas Near Wellington
We run Mr-Glass service throughout Wellington service area and into the surrounding communities. You’ll also see our vans in West Palm Beach, Royal Palm Beach, and Palm Beach Gardens. We cover Mr-Glass service in Palm Beach Gardens with the same crew and the same written pricing, and we handle Mr-Glass service in West Palm Beach from our home base there. One crew, one standard, no subcontractor roulette.
Book Your Mr-Glass Service in Wellington Today
Call (728) 728-9381 and you’ll get a live person, not a voicemail tree. We’ll schedule a time that works for your Wellington property, show up with the right parts, and put the price on paper before we touch a screw. If it’s not done right, our 365-Day Done Right Promise means we come back at no charge. Call today for a free estimate.
Written by Elliot Vance, Owner at Meridian Windows and Doors West Palm Beach, serving Wellington since 2009.
Six Reasons Homeowners Choose Meridian Windows and Doors West Palm Beach
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.