ES Windows Window Replacement Nationwide

ES Windows Window Replacement: The West Palm Beach Owner’s Guide

We stock and install ES Windows-compatible replacement windows throughout West Palm Beach, with most single-window replacements running $650 – $1,150 installed depending on size, glass package, and frame condition. If your ES Windows unit has a cracked sash, failed seal, or a crank mechanism that’s given up, we can usually get the replacement ordered and installed within 3 – 5 business days. Most homeowners discover the failure the hard way: a window that won’t close tight against South Florida humidity, condensation trapped between the panes, or a handle that spins without moving the sash.

Call (728) 728-9381

Which ES Windows Models This Applies To

ES Windows builds aluminum and vinyl lines that show up all over West Palm Beach, from waterfront condos off Flagler Drive to single-family homes in Flamingo Park and El Cid. The compatibility question matters before you order anything. ES Windows uses two distinct frame series: their residential aluminum line (common in mid-rise and high-rise condo work) and their vinyl impact-rated series (more common in single-family replacements). The glass package, frame depth, and hardware type differ between them, and a sash from one series will not seat properly in the other.

Here’s the practical part: look for the ES Windows label etched into the corner of the glass or stamped on the frame edge. If the label is gone, measure the visible glass width and height, then the full frame depth. A 2-1/2-inch frame depth versus a 3-1/4-inch frame depth tells us which series you have faster than any guesswork. For OEM replacement parts, ES Windows keeps tighter control on their commercial aluminum hardware than on vinyl line components, where quality aftermarket equivalents from brands like Truth Hardware and PGT are often available faster and at a better price without sacrificing fit. We recommend OEM for anything still under the manufacturer’s warranty; once that warranty has expired, we’ll give you a straight answer on whether aftermarket makes sense for your window.

Signs Your ES Windows Window Replacement Is Failing

Here’s what we see most often on ES Windows units in West Palm Beach, and what’s actually causing each symptom:

• Fog or condensation between the glass panes. The IG (insulated glass) seal has failed. South Florida’s humidity accelerates this; once the seal goes, the argon gas escapes and the glass fogs permanently. This is a glass replacement, not a full window replacement.
• Window won’t close or lock without lifting and shoving. The aluminum frame has shifted or the sash balance is worn. Over time, thermal expansion in West Palm Beach heat cycles loosens the corner joints, and the sash drops out of square.
• Crank handle spins but the sash barely moves. The operator gear inside the crank mechanism is stripped. This is one of the most common ES Windows hardware failures we see, especially on casement and awning windows exposed to direct afternoon sun.
• Visible corrosion or pitting on the aluminum frame. Salt air near the Intracoastal or the ocean will eat through the factory finish over time. Once pitting starts, the frame integrity is compromised and the seal between frame and glass becomes a water entry point.
• Water stains or soft drywall below the window after rain. The exterior seal has failed, not the window itself. But an ES Windows unit with a compromised seal will keep leaking until the replacement is properly flashed and sealed. This is where the cheap fix turns into a mold and drywall problem.

Replacement Cost & What’s Included

In West Palm Beach, a single ES Windows replacement runs $650 – $1,150 installed. An IG glass-only replacement (where the frame is still sound) runs $280 – $520 per sash. A full casement or awning unit with new hardware and glass runs higher, $900 – $1,800 installed, because the labor includes pulling the old frame, squaring the opening, and re-flashing against South Florida wind-driven rain.

What drives the price difference: glass package (single-pane, double-pane, or impact-rated laminated glass), frame material, and whether the opening requires modification. A standard same-size replacement is quick; an opening that’s shifted out of square takes more shim work and more time. Every quote includes the part, the labor, the flashing and sealant, and haul-away of the old unit. The price we put on paper is the price you pay, and the work is covered by our 365-Day Done Right Promise: if the replacement fails within a year, we come back at no charge.

DIY or Call Us?

Replacing glass in an ES Windows frame is not a weekend project. The glass is glazed into the sash under tension, and on impact-rated units that glass is heavy, with laminated layers that make a bad lift a serious back injury. Removing the sash without the right technique often bends the aluminum frame, making a $300 glass replacement into a $1,100 full window replacement. If the frame is sound and only the glass is fogged, you’re looking at a glass pack swap, but that still requires proper glazing tape, setting blocks, and sealant. We’ve seen enough DIY attempts where the homeowner ended up paying for both the botched attempt and the proper fix.

What you can safely check: the label data, the frame depth, and whether the sash moves freely on its track. That information helps us identify the right part before we arrive. For anything beyond that, call us at (728) 728-9381 and we’ll send a technician who does this work every week, not once every five years.

FAQs