CGI Window Replacement Nationwide

CGI Window Replacement: The West Palm Beach Owner’s Guide

We stock and install CGI-compatible window replacements across West Palm Beach, with most single-unit replacements running $1,450 to $2,900 installed depending on size, glass package, and frame condition. A typical swap takes one morning on site, and we carry the common CGI hardware and seal components on our trucks so we’re not waiting on parts runs. Most owners discover the problem not with a dramatic failure but with a window that no longer rolls or locks the way it did the year before – humidity and salt air in West Palm Beach work on seals and rollers long before the glass itself shows a crack.

Call (728) 728-9381

Key Takeaways

• CGI window replacement in West Palm Beach typically runs $1,450 to $2,900 per unit installed, parts and labor included
• We identify the exact CGI series from the label etched on the glass corner or the frame sticker, then match the replacement rather than forcing a generic fit
• Most failures we see are seal, roller, and balance issues – the glass itself often has years left
• Every quote is written before work begins, and every install carries our 365-Day Done Right Promise

Which CGI Models This Applies To

CGI builds several lines that show up regularly in West Palm Beach homes – the Estate Series, the Targa Series, and the Sentinel line being the most common we replace. The quickest way to identify yours is the laser-etched code in the corner of the glass or the white label on the frame edge, which lists the series, the glass package, and the manufacturing date. That label matters more than you’d think. A CGI window from 2014 may have a completely different roller and balance setup than one from 2021, even in the same model line.

On the OEM-versus-aftermarket question, here’s what we’ve learned doing this work in South Florida for over a decade. CGI’s OEM parts are well made and we install them when the window is still under its original warranty or when the homeowner wants a factory-exact match. For older units out of warranty, a quality aftermarket balance or roller from a supplier we’ve vetted often performs as well or better, and it keeps the total price down. We’ll show you both options, with numbers, before you commit. One compatibility gotcha we see often: CGI’s impact-rated frames use a heavier glass package than standard windows, which means the balances and hinges must be rated for the extra weight. A generic replacement part that “fits” the track but is not rated for the load will sag within a year.

Meridian Windows and Doors West Palm Beach is an independent service provider, not affiliated with CGI. We stock parts for PGT, CWS, and ES Windows as well.

Signs Your CGI Window Replacement Is Failing

• The window is hard to open or close, or it drops when you lift it. The balances (the spring-loaded mechanisms inside the side tracks) are worn or corroded. In West Palm Beach’s humid air, we replace balances on CGI units far more often than glass.
• You feel a draft around the frame even when the window is locked. The weatherstripping or the corner seals have degraded. Salt air accelerates this along the coast, and a failed seal is also a water entry point during storms.
• Condensation or haze sits between the panes. The insulated glass unit’s seal has failed, which means the argon or krypton fill has escaped and the window has lost its thermal performance. This is a replacement item, not a repair.
• The lock no longer engages or the latch is loose. Frame warping, worn hardware, or a shifted sash can prevent the lock from catching. An unlocked window is also a security issue, and a loose sash is the first thing a hurricane wind will test.
• You see rust or pitting on the hardware or the frame corners. Coastal air in West Palm Beach eats powder coating over time. Once the frame is compromised at the joints, patching buys you months, not years.

Replacement Cost & What’s Included

In West Palm Beach, expect a single CGI window replacement to fall between $1,450 and $2,900 installed. Smaller fixed or single-hung units sit at the lower end; larger impact-rated sliders and picture windows with upgraded low-E or tinted glass run toward the top. The main cost drivers are the glass package, the frame size, and whether the existing frame is still square and salvageable. A rotted or racked frame adds framing and seal work.

Every quote from us includes the part, the labor, the haul-away, and the seal and flashing work to keep South Florida wind and rain out. The price goes on paper before a single screw turns, and it does not move at the door. The install itself is covered by our 365-Day Done Right Promise: if the replacement fails within a year for any reason related to our work, we come back at no charge. That includes the second visit if it’s ever needed.

DIY or Call Us?

If you’re comfortable with a flashlight and a measuring tape, there are two things worth checking before you call. First, find the label on the glass or frame edge and write down the series and date code. Second, check whether the visible weatherstripping is torn or compressed, which tells us if the seal is the failure point or the sash hardware. These two details save us time and you money on the diagnostic.

What we don’t recommend is pulling the sash, attempting a balance replacement, or forcing a frame back into square on your own. Impact-rated CGI frames are heavy, the balances are under genuine tension, and a sash that lets go takes out glass and fingers. Elliot Vance has a line about this work: measure it right the first time and the install explains itself. The measurement half is the part that gets homeowners hurt when they rush it. Call our crew at (728) 728-9381 and we’ll do the measuring, the sourcing, and the install – with a number in writing before the work starts.

FAQs