New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors West Palm Beach pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ViewLux Door Installation: The West Palm Beach Owner’s Guide
ViewLux door installation in West Palm Beach typically runs $380 to $720 for a single door panel replacement, installed, with most jobs completed in under three hours once the part is confirmed. If your ViewLux door is sticking, sagging, or leaking air around the frame, the issue is usually the hinge assembly, the weatherstripping, or the threshold, not the glass panel itself. We stock ViewLux-compatible hardware for the most common West Palm Beach installations and can match your existing frame to an OEM or a spec-matching aftermarket part before giving you a written price.
Which ViewLux Models This Applies To
ViewLux doors come in three main series lines we see across West Palm Beach: the VL-Classic swing door, the VL-Contemporary with its narrower stile profile, and the VL-Impact series rated for hurricane zones. The quickest way to identify your specific build is to look for the etched product code in the lower corner of the glass panel, usually starting with “VL-” followed by four digits. If the etching has worn off, measure the door slab width: VL-Classic slabs run a true 36 inches, while VL-Contemporary runs slightly narrow at 35-5/8 inches. That 3/8-inch difference means the wrong slab will not seat in the frame, no matter how well it is shimmed.
On the OEM versus aftermarket question: ViewLux OEM hardware carries a longer factory warranty, but the aftermarket equivalents we stock from suppliers like Truth Hardware and Roto match the originals in spec and often cost 20 to 30 percent less. The real compatibility gotcha is in the weatherstripping. ViewLux frames use a channel-mount gasket, not the compression-fit gasket you find on Therma-Tru or PGT doors. If you install the wrong gasket, the door will seal poorly against West Palm Beach’s humid air, and you will notice condensation on the interior glass within a few weeks.
Signs Your ViewLux Door Installation Is Failing
- The door drags on the threshold or sticks at the top corner. This usually means the top hinge screws have backed out under the weight of the slab. In West Palm Beach, where humidity softens the door casing over time, the screws lose purchase and the slab tilts.
- You see sunlight or feel a draft around the closed door. The channel-mount gasket has compressed flat, or the threshold riser has slipped. ViewLux uses a two-piece threshold design that can separate from the sill pan with repeated exposure to standing water from Florida storm runoff.
- The door will not latch without lifting the handle. The strike plate has moved, or the slab has settled. This is not a defect; it is a wear pattern. Every swing door in South Florida does this eventually.
- The glass fogs between the panes. The low-E seal has failed. ViewLux insulated glass units carry a factory warranty, but claims through the manufacturer can take six to ten weeks. We can swap the IGU locally in under a week when a replacement panel is in stock.
- The impact-rated hardware on VL-Impact doors feels loose or rattles. The interlocking flange at the meeting stile has worn. On hurricane-rated doors, this is a structural issue, not a cosmetic one, and it needs to be addressed before wind season.
Replacement Cost & What’s Included
Here are the installed price ranges we quote in West Palm Beach for ViewLux door work:
- Single door slab replacement (non-impact): $380 to $520 installed, including shimming, hinge adjustment, and weatherstripping.
- Impact-rated slab (VL-Impact series): $540 to $720 installed, including the interlocking stile hardware and a post-install air-seal test.
- Full frame-and-slab replacement: $1,100 to $1,500, depending on whether the rough opening needs carpentry corrections.
- Weatherstripping or threshold replacement only: $95 to $180 installed, parts and labor.
- Insulated glass unit (IGU) swap: $220 to $390 per panel, depending on tint and low-E coating.
What drives the range is the series line and the condition of the rough opening. A VL-Contemporary door on a settled frame takes longer to square than a VL-Classic on new construction. The price we write down before the work starts includes the part, shims, fasteners, sealant, and labor. There is no change order if we find a rotted sill pan. We quote it, then we fix it. Every ViewLux installation carries our 365-Day Done Right Promise in writing. If it fails within a year, the crew returns at no charge.
DIY or Call Us?
You can do a few things safely without touching the door itself. Check the hinge screws with a screwdriver to see if they are loose. Look at the channel-mount gasket with a flashlight to see if it is compressed. Measure the slab width and write down the VL code from the glass corner. That information lets us quote the job over the phone.
What you should not do is attempt to rehang a heavy glass door yourself. A ViewLux slab with an insulated glass unit weighs between 85 and 110 pounds. A slab that slips off a shim stack while you are adjusting it can break the glass or take a finger off. Same rule applies to impact-rated hardware. The interlocking stile is under real tension when the door is closed, and misaligning it compromises the rating you paid for. Call (728) 728-9381 and we will send a background-checked, uniformed technician with the right part and the right torque wrench.
FAQs
A properly installed ViewLux door should give you 18 to 22 years in West Palm Beach’s climate, with the weatherstripping and threshold needing replacement every 5 to 7 years due to humidity and sun exposure. Impact-rated hardware may need tuning every 3 to 4 years to keep the interlocking stile seated correctly. Call (728) 728-9381 if your door is over 10 years old and starting to show the symptoms above – a tune-up is cheaper than a full slab replacement.
Yes, in most cases. A sagging door, a worn gasket, or a slipped threshold can be corrected without replacing the slab. We only recommend a full replacement when the frame has rot, the glass unit has a failed seal, or the hinge screws no longer hold because the casing behind them is gone. Call (728) 728-9381 for a free estimate and we will tell you which one you need before any money changes hands.
A single slab replacement on a prepared opening takes under three hours. A full frame-and-slab replacement takes one day. If we need to order an OEM panel that is not in stock, the lead time typically runs 4 to 7 business days in West Palm Beach. We will give you a written date before we start, and we hit it.
We stock the most common ViewLux slab sizes, channel-mount gaskets, and threshold risers on our service vehicles for the West Palm Beach market. We also carry compatible hardware for PGT, CGI, and CWS doors. If your exact part is not on the truck, we pull it from our local supplier network the same day in most cases.
Call (728) 728-9381 to schedule your free ViewLux door installation estimate in West Palm Beach. We answer the phone with a live person, 24 hours a day. The price goes on paper before any work starts, and it does not move at the door.
Written by Elliot Vance, Owner, Meridian Windows and Doors West Palm Beach at Meridian Windows and Doors West Palm Beach, serving West Palm Beach and nearby areas.
Six Reasons Homeowners Choose Meridian Windows and Doors West Palm Beach
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.